Products


THE PRAMAC LUCE MICROMORPH® MCPH P7 MODULES
ARE MANUFACTURED USING SILICON THIN FILM
DOUBLE JUNCTION TECHNOLOGY.
THIS PROCESS COMBINES AN AMORPHOUS SILICON
TOP LAYER OVER A MICROCRYSTALLINE SILICON
LAYER.
THE TOP CELL ABSORBS AND CONVERTS THE VISIBLE
SOLAR SPECTRUM, WHILE THE BOTTOM ONE
IS SENSITIVE TO NEAR IR WAVELENGTHS.
THIS IS THE REASON WHY MICROMORPH® PANELS ARE
EVEN MORE EFFICIENT.
MOREOVER, THANKS TO THE FRAMELESS DESIGN, THEY
ARE PERFECTLY SUITABLE FOR ARCHITECTURAL
INTEGRATIONS. THE MICROMORPH® TECHNOLOGY PROVIDES GREATER
EFFICIENCY AND FASTER RETURN ON INVESTMENT:
DOUBLE JUNCTION MODULES CONVERT A WIDER
SPECTRUM OF SOLAR RADIATION.

MICROMORPH® PHOTOVOLTAIC MODULE
PRAMAC LUCE MCPH P7
GENERAL FEATURES AND ELECTRICAL PARAMETERS
Cell/Module   Tandem-J Amorphous and Microcrystalline Silicon(a-Si/uc-Si)
Power classes     105W 115W 125W
Power range -- (W) ±5 ±5 ±5
STC specifications*     x     · x     · x     ·
Maximum power Pm (W) 105,0 117,3 105,0 128,5 125,0 139,7
Maximum power voltage Vmpp (V) 91,3 92,3 96,9 97,6 103,2 104,3
Maximum power current lmpp (A) 1,15 1,28 1,19 1,32 1,21 1,34
Open circuit voltage Voc (V) 125 125 128,8 128,8 134,6 134,6
Short circuit current lsc (A) 1,43 1,49 1,44 1,50 1,45 1,51
Fill factor FF (%) 58,6 62,2 64,4
Module sfficiency (%) 7,3 8,0 8,7
Specific power -- (W/m2) 73,4 80,4 87,4
X stabilised value   · initial value            *STC: 1000 W/m cell temperature 25°C, AM 1.5 - All electrical parameters with ±3% uncertainty

TEMPERATURE COEFFICIENTS
Pmpp temperature coefficient Pmpp (% / °C) -0,29
Voctemperature coefficient Voc (% / °C) -0,38
lsc temperature coefficient lsc (% / °C) +0,02
lmpp temperature coefficient lmpp (% / °C) +0,14
Vmpp temperature coefficient Vmpp (% / °C) -0,45
NOCT
MECHANICAL FEATURES    *
  (°C) 47
Height   (mm) 1300
Width   (mm) 1100
Glass thickness   (mm) 6,7±0,3
Active layer height   (mm) 1274
Active layer width   (mm) 1074
Depth   (mm) 26
Weight   (kg) 24
Area   (m2) 1,43
Encapsulant   (Type/material) polyvinyl butyral
Front glass thickness   (mm) 3,2
Back glass (HSG) thickness   (Type/material) 3,2
IP65 J-box with by-pass diode
and MultContact ® MC4 conectors
    TÜV-certified
Conections     flex-sol 2,5 mm2 x 80 cm
MAXIMUM VAULES      
Maximum system voltage Vsys (VDC) 1000
Operational temperature range T (°C) -40°/+85°
Wind loading or surface pressure P (kPa) 2,4
Hailstone impact resistance
WARRANTY
    up to 35 mm at 101 km/h
Guaranteed energy capability
25 years (Pmpp)
  (%) 85
Guaranteed energy capability
15 years (Pmpp)
  (%) 87,5
Guaranteed energy capability
10 years (Pmpp)
  (%) 90
Guaranteed energy capability
5 years (Pmpp)
  (%) 92,5
Warranty against manufacturing defects     5 years

PERFORMANCE AT LOW IRRADIANCE
Irradiance (W/m2) P(W) P(W) P(W)
1000 105 115 125
800 84,4 92,7 100,8
600 63,4 69,4 75,5
400 41,2 45,2 49,1
200 19,3 21,1 23,0